 |
Property In May,
1990, M & M purchased an existing plant located off Logy Bay Road in the
north east sector of the City of St. John's, Newfoundland.
The property includes 15.2 acres of land and 44,745 square feet (net rental area) of
building area. The fabrication/service/warehouse area covers 40,000 square feet (net
rentable area) and the two-floor office area covers 7,125 square feet (net rentable area).
The building is of steel frame construction with concrete block infilling. In 1998 the
company added a large, temperature and humidity controlled paint shop.
Plant
The plant is serviced throughout with 5 and 10 ton overhead cranes, two exterior crane
runways at one end and one exterior crane runway at the other. The maximum
clearance to the bottom of the crane hook is 17'7".
Major Fabrication Equipment
M & M owns the following tools and equipment:
1. Shears:
- Accurshear 1/2" x 10'-0
2. Plate Rolls:
- Webb 5/8" x 10'-0
3. Press Brake:
- Cincinnati 150/220 Tons
12'-0 bed
4. Ironworker: (2)
- Buffalo Punch 1 3/16 holes
Cut 5 x 5 x 1/2" angle
5. Wheelabrator:
- 60" wide x 11'-0 high vertical
6. Submerged Arc Welding Equipment
- Manipulator (2)
7. Forklifts
- 12 Ton Catapillar (1)
- 5 Ton Catapillar (1)
8. Overhead Cranes
- 10 Ton (2)
- 5 Ton (6)
9. Hyd-Mech. Band Saws (3)
10. Wire Feed Welding Equipment (14)
11. Whitney Punches (4)
12. Plasma Arc Cutters (2) |
13. Pipe/Plate Bevellers (6)
14. 300/400 Amp Electric Welding Machines (40)
15. 1/2 Ton & 3/4 Ton Pickups (2)
16. 1 1/2 Ton Stake Body Truck (1)
17. Jib Cranes & Hoists - 5 Ton (7)
18. Complete Temperature/Humidity Controlled Paint Shop (140 ft. x 30 ft.)
19. Motorized Burning Units (4)
20. Stress Relief Equipment
- Computer controller #2006 Cooperheat Unit with 6 pen strip chart with oven capabilities.
21. Hydrostatic Testing
- 30,000 PSI High Pressure Pump with Fittings (1)
- 20,000 PSI High Pressure Pump with Fittings (2)
22. Blue Valley - Circle Cutter & Flanging Machines
23. Fosdick - Radial Drill |
Major Construction Equipment
2 - 17 Ton Boom Trucks
1 - 8 Ton Boom Truck
30 - 300 Amp Electric Welding Machines
1 - 75 KVA Generator
3 - 10 KVA Generators
10 - Hydraulic Jacks (100 Ton)
4 - Roller Dollies (100 Ton) |
100 - Chain Falls (« Ton - 20 Ton)
16 - 400 Amp Diesel Welding Machines
1 - 4000 lb. Forklift
14 - « & 3/4 Ton 4 x 4 pickups
6 - Construction Office/Lunch Trailers
2 - Fully Equipped Mobile Tool Cribs |
|
